DeWalt DXPW3425E User Manual

7
7
Release Air from System
Release all air from pump and high
pressure hose by depressing trigger
until a steady stream of water is
present. Approximately 30seconds.
8
Place the fuel valve lever in the
ONposition.
9
Verify the Engine Switch is
turned to the ON Position
30 S
10
Move the choke to the
CLOSEDposition
11
Press the starter button OR pull
the Recoil Starter Grip
Press the starter button for 3seconds
to start engine OR Pull the recoil
starter grip to start theengine.Repeat
asneeded.
12
Move the choke to the
OPENposition
OR

WARNING: This Guide is not a substitute for reading the operator’s manual. User must read and understand operator’s
manual before using thisproduct.
Engine
Refer to the engine instruction manual for location and operation of other enginecontrols.

DeWalt DXPW3425E Specifications

General

Pressure Rating	3400 PSI
Flow Rate	2.5 GPM
Hose Length	25 ft
Power Source	Gasoline
Motor	Honda GX390
Nozzles Included	0°, 15°, 25°, 40°, Soap