To Next PageTo Next Page
Need help?Do you have a question about the DeWalt DXSTA2CM and is the answer not in the manual?
General| Brand | DeWalt |
|---|---|
| Model | DXSTA2CM |
| Category | Power Tool Accessories |
| Material | Steel |
| Color | Black |
| Number of Drawers | 2 |
| Casters | Yes |
| Type | Tool Chest |
| Compatibility | Compatible with DeWalt |
Maintain a clean, dry workspace and use appropriate tools. Never leave tools unattended or force parts.
Always wear safety apparel and eye protection, such as safety glasses or goggles.
Never hang from, sit on, or climb on the rack. Keep small parts away from children.
Warning about severe injury or death from rack tipping; requires wall securing, especially in seismic areas.
Warning not to exceed the 50 lb (22.6 kg) weight limit per cord minder set.
Read all instructions, lay out components, wear eye protection, and be cautious of sharp edges.
Determine where to mount cord minders on the rack upright and slide into place.
Install the locking pins to secure the cord minder brackets in place.
Place the second cord minder to achieve the desired distance between units.
Rotate brackets by pulling near the base, not the top, to desired position.
Use opposing bracket orientations for secure cord wrapping and avoid overloading.
Rotate brackets before removing cords to prevent damage or rack tipping.
DEWALT replaces faulty materials or workmanship for one year from purchase date.
Return within 90 days with receipt for a full refund if not completely satisfied.
Warranty does not apply to products sold in Latin America; consult local information.
Keep workspace clean, use recommended tools, never leave tools unattended, and do not force parts.
Wear safety clothing and eye protection.
Never hang from, sit on, or climb on the rack. Keep children away from assembly area.
Secure rack to wall to prevent tipping, especially in earthquake areas or with children/pets.
Do not exceed 50 lb (22.6 kg) per set. Remove load if separation or damage occurs.
Attach bracket to rack upright, slide down, and tap to seat properly.
Install locking pins for security.
Position the second bracket for desired spacing.
Rotate by pulling near the base; do not pull from the top.
Use opposing bracket orientations for secure storage; avoid overloading.
Rotate brackets before removing cables to prevent damage or tipping.
Keep work area clean and dry; use correct tools and never leave unattended.
Wear safety apparel and eye protection; be cautious of sharp edges.
Do not hang on rack, sit on rack, or climb rack. Keep children supervised.
Serious injury or death can occur if rack tips; must be secured to wall.
Never exceed 50 lb (22.6 kg) per set. Remove load if separation or damage occurs.
Identify parts: Cord Minder Bracket (2) and Locking Pin (4).
Read all instructions, lay out components, wear eye protection, and check for sharp edges.
Place bracket on rack upright, slide down, and tap to seat.
Install locking pins to secure the brackets.
Position the second bracket for the desired spacing.
Rotate by pulling near the base, then release to desired position.
Use opposing bracket orientations for secure cord wrapping; avoid overloading.
Rotate brackets before removing cables to prevent damage or tipping.
