DeWalt DW7187 - User Manual

DW7187 Miter Saw Laser System
Système laser pour scie à onglets DW7187
Sistema láser para sierra ingletadora DW7187
INSTRUCTION MANUAL
GUIDE D'UTILISATION
MANUAL DE INSTRUCCIONES
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA
DE GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO
ANTES DE USAR EL PRODUCTO.
If you have questions or comments, contact us.
Pour toute question ou tout commentaire, nous contacter.
Si tiene dudas o comentarios, contáctenos.
1-800-4-DEWALT • www.dewalt.com

DeWalt DW7187 Specifications

General

Product Type	Miter Saw Stand
Compatibility	DeWalt Miter Saws
Weight Capacity	300 lbs
Material	Carbide
Length	7-1/4 inches
Accessory Type	Miter Saw Stand
Compatible Tools	DeWalt Miter Saws
Type	Miter Saw Stand
Compatible Models	DW713, DW715, DW716, DW718

Summary

Safety Instructions for Lasers

Warning Labels

Laser Information

Details about the DW7187 Miter Saw Laser System, including its class and compliance.

Installation of Miter Saw Laser System

Installation of Laser Power Supply (LPS)

Instructions for installing the Laser Power Supply (LPS) on the miter saw.

Installation of Laser

Step-by-step guide for attaching the laser module to the miter saw assembly.

Use of Miter Saw Laser System

Laser Adjustment Overview

Instructions for turning on the laser and initial setup for adjustments.

Perpendicularity Alignment

Align laser line vertically with the cut from top to bottom of the board.

Parallelism Alignment

Align laser line parallel to the cut from front to back of the board.

Kerf Alignment

Align laser line with board edge for kerf compensation.

Maintenance

Specifications

Technical details including light source, power supply, and operating temperatures.

Repairs

Guidelines for product safety, reliability, and authorized service.

Troubleshooting Guide