English
8
normal wear or tool abuse. For further detail of warranty coverage
and warranty repair information, visit www.dewalt.com or call
1-800-4-D
EWALT (1-800-433-9258). This warranty does not
apply to accessories or damage caused where repairs have
been made or attempted by others. This warranty gives you
specific legal rights and you may have other rights which vary in
certain states or provinces.
In addition to the warranty, D
EWALT tools are covered by our:
1 YEAR FREE SERVICE
D
EWALT will maintain the tool and replace worn parts caused by
normal use, for free, any time during the first year after purchase.
90 DAY MONEY BACK GUARANTEE
If you are not completely satisfied with the performance of your
D
EWALT Power Tool, Laser, or Nailer for any reason, you can
return it within 90 days from the date of purchase with a receipt
for a full refund – no questions asked.
RECONDITIONED PRODUCT: Reconditioned product is
covered under the 1 Year Free Service Warranty. The 90 Day
Money Back Guarantee and the Three Year Limited Warranty do
not apply to reconditioned product.
FREE WARNING LABEL REPLACEMENT: If your warning
labels become illegible or are missing, call 1-800-4-D
EWALT for
a free replacement.
Troubleshooting Guide
Laser line moves from side to side during chopping motion. See Laser Adjustment Step 4 or Step 7.
Laser line is not parallel to line at 0˚ miter. See Laser Adjustment Step 5 or Step 8.
A reflection of the laser appears on the blade. Adjust laser away from blade; See Laser Adjustment
Step 6 or Step 9.
Laser line is not visible on workpiece but laser shines on blade. See Laser Adjustment Step 9.
Laser line is bent or not visible on workpiece. Adjust side screw (G) clockwise until it stops; proceed with
Laser Adjustment Step 4–10.
Laser line is not visible on workpiece, laser is not shining. If working in a hot climate, turn the laser off and allow to
cool. Turn the laser on. If laser still not visible call
1-800-4-D
EWALT (1-800-433-9258).
To Next Page
Loading...
