EasyManuals Logo

DeWalt DXV10SB User Manual

DeWalt DXV10SB
7 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
PAGE 6 OF 7 0321 IH-8931
OPERATION CONTINUED
EMPTY THE TANK
WARNING: To reduce the risk of injury from
accidental starting, unplug power cord before
emptying dust tank.
1. Remove power head assembly of wet/dry vacuum
by pulling outward on lid clips located on each side
of vacuum. Lift off power head assembly.
2. Dump tank contents into proper waste disposal
container.
3. Liquids may be emptied through tank drain. To
empty, turn off unit and remove plug from wall
outlet. Remove drain cap and deposit liquid waste
contents in suitable drain. After tank is empty, return
drain cap to its original position. To continue use,
plug cord into wall outlet and turn on the unit.
(See Figure 6)
BLOWING OPERATION
WARNING: Always wear safety goggles
complying with ANSI Z87.1 (or in Canada
CSA Z94.3) when using as a blower.
WARNING: To avoid injury to bystanders, keep
them clear of blowing debris.
CAUTION: Wear a dust mask if blowing creates
dust that might be inhaled.
CAUTION: To reduce the risk of hearing loss,
wear ear protectors when using the vac/blower
for extended hours or when using it in a noisy
area.
1. Locate blowing port on the vac.
2. Insert one end of the 1⁄" x 7' hose into the blowing
port. (See Figure 7)
3. Turn vacuum "ON".
Figure 6
Drain
Figure 7
Blowing
Port

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the DeWalt DXV10SB and is the answer not in the manual?

DeWalt DXV10SB Specifications

General IconGeneral
BrandDeWalt
ModelDXV10SB
CategoryVacuum Cleaner
LanguageEnglish

Related product manuals