9
ENGLISH
F
E
BATTER
6.
when there is no battery pack in the cavity
clean.
7.
DO NOT
WARNING: SHOCK HAZARD.
shock may result.
WARNING: BURN HAZARD.
any liquid to enter the batter
reason. If the plastic housing of the batter
center for recycling.
OPERA
WARNING: T
INSTALLING & REMOVING BATTERY P
NOTE:
For best results, make sure your batter
•
To install the battery pack
E
inside the tool’
• To remove the batter
and firmly pull the batter
NOTE:
After removing the battery pack,
squeeze the trigger for three seconds
to dissipate any electric charge
that may still be in the tool.
OPERATING INSTRUCTIONS
FUEL GAUGE BATTERY PACKS
Some DeWALT battery packs include a fuel gauge which consists of three green LED
lights that indicate the level of charge remaining in the battery pack.
75 – 100% charged
51 – 74% charged
<50% charged
Pack needs to be charged
G
To actuate the fuel gauge, press and hold the fuel
gauge button
G
. A combination of the three green
LED lights will illuminate designating the level of
charge left. When the level of charge in the battery
is below the usable limit, the fuel gauge will not
illuminate and the battery will need to be recharged.
NOTE:
The fuel gauge is only an indication of the approximate charge left on the
battery pack, according to the indicators below. It does not indicate tool functionality
and is subject to variation based on product components, temperature and end-user
application.
BAT20CW-1390355ART.indd 9
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
Need help?
General
