SYSTEM SETTINGS
The system settings screen includes configuring the following options: Language, Sys Beep,
Sleep and Sys Reset. Press the touch button of the function you wish to modify.
Language
Enables changing the interface language.
. 1 Rotate the Selection-Dial to choose the display language and push to select
. 2 Press the Back
button to return to the settings screen.
System Beep
Enables setting the system to sound a beep when a touch button is pressed.
. 1 Press a touch button, ON or OFF, to select if a beep sound should be heard or not.
. 2 Press the Back
button to return to the settings screen.
Sleep
Allows setting the option of having the system stop playing after a set duration, when the system
is in AUX mode.
AUX Sleep: press a touch button to select if ON or OFF.
Sleep Duration: press the touch buttons of the plus or minus signs to increase or
decrease the value. The duration can be set to: 0 (sleep is disabled), 3, 5, 10, 15, 30, 60 or 120
minutes.
System Reset
To restore the appliance to its factory default settings. Selecting Sys Reset displays an approval
message: “Are you sure you want to Restore to default?”
. 1 Pressing the Yes touch button: all settings are restored to factory values.
. 2 Pressing the Cancel touch button: goes back to the Setting System screen.
SOUND SETTINGS
Sound preferences can be adjusted by changing the equalization of the Bass, Treble and
Mid-Range.
. 1 Press the touch buttons of the plus
or minus signs to increase or decrease the level.
. 2 Press the Back
button to return to the settings screen.
DISPLAY SETTINGS
The display Brightness and Auto Dim Display can be adjusted. In addition, you can select how
Flip Display operates when the appliance is positioned vertically.
. 1 Press the touch buttons of the plus
or minus signs to increase or decrease the
screen Brightness level.
. 2 Press the touch buttons of the plus
or minus signs to set the Auto Dim duration, after
which the backlight of the buttons and touch buttons turn off and the display is dimmed.
The duration can be set to: 0 (always on), 60 ,30 ,15 ,10 ,5 ,3 or 120 minutes.
. 3 Press the touch buttons of the AUTO or Manual
sign to select if the display flips
automatically when the appliance is standing vertically.
4. Press the Back
button to return to the settings screen.
BLUETOOTH
®
SETTING
Selecting Bluetooth
®
opens the Bluetooth
®
settings screen for selecting which mobile device to
connect. For details, see Bluetooth
®
Mode above.
AM SETTING
Selecting AM opens the AM settings screen for selecting between: Auto Seek or Manual Seek.
For details, see AM/FM Radio above.
TROUBLESHOOTING
WEAK BATTERY PACKS
Weak batteries will continue to function but should not be expected to perform as well. When the
appliance is powered by a battery pack and its charging level falls below 20%, the low battery
indicator is displayed.
BATTERY PACK PROTECTION
To protect the life of the battery pack, the appliance will shut off when the battery’s charging level
becomes too low. If this happens, connect the TSTAK
®
CONNECT RADIO + CHARGER to an
outlet with the AC/DC power adaptor and charge the battery pack.
MUSIC STOPS
When dropping the appliance in its vertical position the battery pack may disconnect from its
receptacle. If the music is operated by the battery pack, the music will stop. To resume, open the
cover and reposition the battery pack.
To Next Page
Loading...
