DeWalt TSTAK - Selecting Audio Sources (AM;FM;BT;AUX); AM and FM Radio Modes; Setting AM;FM Radio Presets

19
EN
EN
HOME BUTTON
Press the Home button to display the home screen.
The home screen includes icons for selecting the audio source (AM/FM/Bluetooth
®
/AUX), and
for accessing the Settings menu.
 NOTE: The screen automatically returns to the last playing mode screen after about 30
seconds of no activity.
SELECTING THE AUDIO SOURCE
Press the touch buttons to select the audio source (AM, FM, Bluetooth
®
or AUX).
BACK BUTTON
After entering any one of the screens, press the Back button to return to the previous screen.
LEFT AND RIGHT BUTTONS
When in FM or AM audio source, pressing the Left or Right button moves between channels 1–6
and 7-12 and to the list of channels. They move between these screens rotationally.
For more information see the AM and FM modes section.
AM AND FM MODES
The TSTAK
®
CONNECT RADIO + CHARGER can be tuned to AM and FM radio frequencies with
the option of saving up to twelve (12) AM preset stations (favorites) and twelve (12) FM preset
stations (favorites). After setting and saving the favorites, selecting a preset station instantly
changes the frequency to the desired station. The screen displays the station name and after two
seconds, the station frequency.
To move between the rst six stations and the next six stations, push the Left or Right button.
Press any of the touch buttons to select one of the preset stations.
To see a list of the preset stations, press the Right button to the setting tab
and rotate it to
scroll through the preset stations. Press the Selection Dial to select a specic preset station.
AM/FM RADIO
Setting the AM/FM preset stations can be performed by Auto Scan or by Manual Scan. To
select the scan type:
1. Press the audio source (AM or FM).
2. Press the Selection Dial
to enter the AM or FM settings screen.
3. Press the touch button to the left or right of the type of scan to perform.