34
ENGLISH
Read instruction manual beforeuse.
See Technical Data for chargingtime.
Do not probe with conductiveobjects.
Do not charge damaged batterypacks.
Do not expose to water.
Have defective cords replacedimmediately.
Charge only between 4 ˚C and 40 ˚C.
Only for indooruse.
Discard the battery pack with due care for
theenvironment.
Charge
battery packs only with designated
chargers. Charging battery packs other
than the designated
batteries with a
charger may make them burst or lead to
other dangeroussituations.
Do not incinerate the batterypack.
USE (without transport cap). Example: Wh rating
indicates 108 Wh (1 battery with 108 Wh).
TRANSPORT (with built-in transport cap). Example:
Wh rating indicates 3 x 36 Wh (3batteries of 36 Wh).
Battery Type
The DCM571 operates on a 54 volt battery pack.
These battery packs may be used: DCB546, DCB547. Refer to
Technical Data for moreinformation.
Package Contents
The package contains:
1 String trimmer
1 Auxiliary handle
4 Auxiliary handle screws
1 Strap
1 Guard
4 Guard screws
1 Brush cutter blade
1 Brush cutter nut
1 Brush cutter clamp washer
1 Brush cutter drive washer
5 Cotter pins
1 Nut wrench
1 Rod, lock
1 Blade cover
1 Battery (not for DCM571N)
1 Charger (not for DCM571N)
1 Instruction manual
• Check for damage to the tool, parts or accessories which may
have occurred duringtransport.
• Take the time to thoroughly read and understand this manual
prior tooperation.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual beforeuse.
Wear earprotection.
Wear eyeprotection.
Do not expose the tool to rain or high
humidity
or leave outdoors while it israining.
Switch the tool off. Before performing any
maintenance on the tool, remove the battery
from thetool.
Wear headprotection.
Wear slip-resistantfootwear.
Wear slip-resistantgloves.
Keep people and animals at least 15m away
from the workarea.
Do not use circular metalblades.
Beware of thrownobjects.
Beware of bladethrust.