10
EngliSh
EC‑Declaration of Conformity
Machinery Directive
Cordless Circular Saw
DCS578, DCS579, DCS578-XE, DCS579-XE
DeWALT declares that these products described under
Technical Data are in compliance with:
2006/42/EC, EN62841‑1:2015, EN62841‑2‑5:2014.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
eWALT at
the following address or refer to the back of themanual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf ofD
eWALT.
Markus Rompel
Vice‑President Engineering, PTE‑Europe
DeWALT, Richard‑Klinger‑Straße 11,
65510, Idstein, Germany
27.05.2020
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment ofexposure.
WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total workingperiod.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
over the total workingperiod.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm
(relevant for vibration), organisation of workpatterns.
DCS578 DCS578‑XE DCS579 DCS579‑XE
Voltage V
DC
54 54 54 54
Type 1 1 1 1
Battery type Li‑Ion Li‑Ion Li‑Ion Li‑Ion
No‑load speed min
‑1
5800 5800 5800 5800
Blade diameter mm 190 184 190 184
Maximum depth of cut mm 67 64 61 58
Blade bore mm 30 20 30 20
Bevel angle adjustment 57 57 57 57
Weight (without battery pack) kg 3.6 3.6 3.7 3.7
Noise values and/or vibration values (triax vector sum) according to EN62841‑2‑5:
L
PA
(emission sound pressure level) dB(A) 90 – 90 –
L
WA
(sound power level) dB(A) 101 – 101 –
K (uncertainty for the given sound level) dB(A) 3 – 3 –
Vibration emission value a
h,W
=
m/s
2
2.2 – 2.2 –
Uncertainty K =
m/s
2
1.5 – 1.5 –
Congratulations!
You have chosen a DeWALT tool. Years of experience, thorough product development and innovation make DeWALT one of the
most reliable partners for professional power toolusers.
Technical Data
English (original instructions)
190mm / 184mm 54V CORDLESS CIRCULAR SAW
DCS578, DCS579, DCS578XE, DCS579XE
To Next Page
Loading...
Need help?
General
