27
ENGLISH
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf ofDeWALT.
Markus Rompel
Vice-President Engineering, PTE-Europe
DeWALT, Richard-Klinger-Straße 11,
65510, Idstein, Germany
01.12.2022
DECLARATION OF CONFORMITY
THE SUPPLY OF MACHINERY (SAFETY)
REGULATIONS 2008
AND RADIO EQUIPMENT REGULATION 2017
Dust Extractor
DWH161
DeWALT declares that these products described under
“technical data” are in compliancewith:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended),
EN60335-1:2012 + A11:2014 + A13:2017; EN60335-2-69:2012.
These products conform to the following UK Regulations:
Electromagnetic Compatibility Regulations, 2016, S.I.2016/1091
(as amended).
Radio Equipment Regulations 2017, S.I. 2017/1206 (asamended):
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
2012/3032 (as amended).
For more information, please contact DeWALT at the following
address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of DeWALT.
Karl Evans
Vice President Professional Power Tools EANZ GTS
DeWALT UK, 270 Bath Road, Slough
Berkshire, SL1 4DX
United Kingdom
01.12.2022
Congratulations!
You have chosen a DeWALT dust extractor. Years of experience,
thorough product development and innovation make DeWALT
one of the most reliable partners for professional power
toolusers.
Technical Data
DWH161
Voltage V
DC
18
Type 1
Battery type Li‑Ion
Max. flow rate L/s 9
Max. under pressure kPa 9.5
Hose diameter mm 26
Hose length m 1.0
Weight (without battery pack) kg 1.65
Wireless Tool Control™ remote (optional accessory)
N547456
Voltage V
DC
3
Battery Type CR2032
Frequency Band
Max Power (EIRP)
MHz
mW
433
0.03
Noise values according to EN60335‑2‑69:
L
PA
(emission sound pressure level) dB(A) 66.3
L
WA
(sound power level) dB(A) 82.5
K (uncertainty for the given sound level) dB(A) 1.5
The vibration total value ah to which the hand-arm system is
subjected and measurements uncertainty K are determined in
accordance with ISO 5349-1, the machine being supplied at
ratedvoltage.
ah =<2.5 m/s
2
, K = 0.06 m/s
2
.
EC‑Declaration of Conformity
Machinery Directive
and Radio Equipment Directive
Dust Extractor
DWH161
DeWALT declares that these products described under
Technical Data are in compliance with:
2006/42/EC, EN60335-1:2012 + A11:2014 + A13:2017;
EN60335-2-69:2012.
These products also comply with Directive 2014/53/EU and
2011/65/EU. For more information, please contact DeWALT at
the following address or refer to the back of themanual.
English (original instructions)
UNIVERSAL DUST EXTRACTOR
DWH161
To Next Page
Loading...
Need help?
General
