55
WARNING: No connection is to be made to the
earthterminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 3 A.
Using an Extension Cable
An extension cord should not be used unless absolutely necessary.
Use an approved extension cable suitable for the power input of your
charger (see Technical Data). The minimum conductor size is 1 mm
2
;
the maximum length is 30 m.
When using a cable reel, always unwind the cable completely.
MAINTENANCE
Your D
WALT power tool has been designed to operate over a long
period of time with a minimum of maintenance. Continuous satisfactory
operation depends upon proper tool care and regular cleaning.
WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect battery pack
before making any adjustments or removing/
installing attachments or accessories. An accidental
start-up can cause injury.
The charger is not serviceable. There are no serviceable parts inside
thecharger.
• Do not attempt to repair the charger. To assure product safety
and reliability, repairs, maintenance, and adjustments should be
performed by authorized D
WALT service centers.
Lubrication
Your power tool requires no additional lubrication.
To Next Page
Loading...
Need help?
General
