SEASONAL STORAGE
3) Turn the timer upside down and activate the MANUAL mode. This will
open up the valves and allow you to run water into the output connectors.
By doing this, you can see if there are any clogs in the water flow. Once
you see the water flow is correct, deactivate the MANUAL mode.
Cold or freezing temperatures can damage to the timer if still connected
to the faucet. At the first forecast of frost, it is best to remove the timer
from the faucet and place the timer indoors. (Cold water, if left in the timer,
will damage the timer from the ice formed).
- Remove the batteries when the timer is placed in storage
- Recycle used batteries, do not dispose in the garbage
11
To Next Page
Loading...
