Dewenwils HRLS11D - Operating and Mounting Instructions; Operating Instructions; Mounting the Wall Switch; Programming and Cancellation

Operating Instructions
03
1. Remove the isolation tab in the battery compartment of the transmitter.
2. Press the ON/OFF button on the wall switch remote control to turn the
receiver on and off.
Note:
1. The program button of the receiver can also be used as a manual switch.
2. The receiver will remain "OFF" after a power cut to save energy.
Mounting the Wall Switch
Shown as the figure
Canceling Programming
To remove a receiver from all transmitter parings (no remote transmitter
can control it):