RISK OF ELECTRIC SHOCK OR FIRE.
· Make sure the power is OFF on the wall switch you are replacing.
· The light switch must be installed and used in accordance with the
National Electric Code (NEC) or your local electrical code. If you are
unfamiliar with these codes, or are uncomfortable performing the
installation, please calla qualified electrician.
· Do not install the wall switch with wet hands or when standing on wet or
damp surfaces.
· This Light Switch is for North America only. Max 350W (INC)and 150W
(CFL & LED).
Warning:
Product Layout
01
To Next Page
Loading...
