DEWESOFT DSI-5A-D9M - 3 Technical Data; Electrical Specifications

DSI-5A-D9M
TECHNICAL REFERENCE MANUAL


3. Technical data
3.1. Electrical specifications

 
1
Do not exceed the absolute maximum rating!
DSI-5A-D9M V20-1 4/17 
Input current
5.00A (dc or ac rms continuous) 
1
Pulse load
25.00A @ 5.0sec, 120sec interval, continuous
Shunt resistor
10.0mΩ
Resistance Tolerance
Calibrated to ±0.1%, calibration in TEDS
Temperature Coefficient
< ±30ppm/ºC typical (+20ºC to +60ºC)
Resistor dielectric withstanding voltage
1000Vac
Input connector type
MSTB 2,5/ 3-STF-5,08 Phoenix Contact, mates with
MSTB 2,5/ 3-GF-5,08
Connector info
2.5mm
2
Nominal cross section
TEDS
DSI Compatible