Dexter Power NC1300CS - Machine Data and Specifications; Technical Specifications; Contents of Packing

Dexter Power
20
EN
Original Instructions
CIRCULAR SAW
The numbers in the following text refer to the drawing on page 2-3
WARNING -To reduce the risk of injury, user must read instruction manual. Save all warnings and instructions
for future reference.
Contents:
1 Machine data
2 Safety instructions
3 Assembly
4 Use
5 Service & Maintenance
Intended use
The machine is designed to saw wood. Do not use machine attachments for works other than those for which they are designed
for! All other applications are expressly ruled out.
1. MACHINE DATA
Technical specication:
Type designation NC1300CS circular saw
Rated voltage 127V~ , 60Hz
Rated power input 1300W
Speed, n
0
5800/min
Blade diameter Ø 190mm
Blade bore diameter Ø 16mm
Blade/Body thickness 2.5mm/1.5mm
Blade teeth 24T
Cutting angle 0°to 45°
Max cutting depth 66mm
suggestion:
1) wear glove during operation.
2) limit operating time and shorten trigger time
The sound pressure level exceeds 85dB.
Always wear hearing protection, exposure to high intensity noise may cause hearing loss.
Contents of packing
1 Circular saw
1 Parallel fence
1 Wrench
1 Saw blade
1 Dust extraction adaptor
2 Carbon brushes