Need help?Do you have a question about the Deye SUN-2K-G and is the answer not in the manual?
General| Model | SUN-2K-G |
|---|---|
| Type | Hybrid Inverter |
| Rated Power | 2kW |
| Max. PV Input Voltage | 500V |
| Start Voltage | 120V |
| Number of MPPTs | 1 |
| Battery Voltage | 48 V |
| Max. Charging Current | 50 A |
| Max. Discharging Current | 50 A |
| Rated AC Output Power | 2kW |
| Max. AC Output Power | 2.2kW |
| Max. Output Current | 10 A |
| Rated AC Voltage | 230 V |
| AC Output Voltage | 230 V |
| AC Voltage Range | 180-280V |
| AC Output Frequency | 50/60 Hz |
| THDi | <3% |
| MPPT Efficiency | 99% |
| Operating Temperature Range | -25°C to 60°C |
| Operating Temperature | -25°C to 60°C |
| Protection Degree | IP65 |
| Max. PV Input Power | 3000 W |
| Max. DC Input Power | 2.6 kW |
| MPPT Range | 120-430 V |
| Protection | Over Current, Short Circuit, Over temperature |
| Cooling | Natural Cooling |
| Communication | RS485 |
Explains the meaning of various safety symbols used in the manual.
Provides essential safety guidelines for installation and operation.
Criteria and warnings for choosing a suitable installation site for the inverter.
Step-by-step guide for physically mounting the inverter on a wall.
Instructions and safety notes for connecting the DC input terminals.
Details on connecting the AC output terminals and cable specifications.
Guidance on properly connecting the ground wire for safety and performance.
Recommendations for circuit breakers to prevent overcurrent.
Step-by-step instructions for safely starting the inverter.
Step-by-step instructions for safely shutting down the inverter.
Lists error codes, their descriptions, and suggested solutions for single-phase operation.
To Next Page