8
Front Panel/ Rear Panel
Rear Panel
(1) AERIAL IN: Input for antenna.
(2) LOOP OUT: Loop signal output to VCR, etc.
(3) HDMI connection
(4) S/PDIF: S/PDIF audio format output system.
(5) S-VIDEO: S-VHS Video output
(6) Y/Pb/Pr RCA A/V: Component connection (Y/Pb/Pr)
(7) Video RCA A/V: Composite connection
(8) Audio (white: left audio, red: right audio): Right & left audio for Component
connection
(9) RS-232: To connect to your PC for software upgrade (only used by qualified
DGTEC technician)
(10) POWER: Power ON/OFF switch
To Next Page
Loading...
