DHD 52/SX - Pin assignment of 52-1330

Version 1.3.0 - 07.11.2011
10
Assembling and Wiring the Hardware
Specifications and design are subject to change without notice. The content of this document is for information only. The information presented in this document does not form part
of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use.
Publication thereof does neither convey nor imply any license under patent rights or other industrial or intellectual property rights.
Name of the APC port
52-1801
52-1804
APC 8
I/O box 1 / DeviceLink 1
n. a.
*) The APC port 6 is useable either for a fader module, an I/O box or an DeviceLink. Because of this, for example a 12
fader mixing console with three I/O boxes or a 16 fader mixing console with two I/O boxes are the maximum
configurations for a 52/SX.
Weblink
Please find a PDF file with cabling examples in the 52/SX Download area on
www.dhd-audio.com.
5.4.2 Pin assignment of 52-1330
Rear View 52-1330
The connectors of the 52-1330 are D-sub type (15 pins), apart from the S/PDIF, USB audio and APC.
Weblink
Please find a PDF file with pin assignments in the 52/SX Download area on
www.dhd-audio.com.
Note
Breakout cables for the D-sub connectors of the 52/XS Multi-I/O Box are not
available from DHD.