Need help?Do you have a question about the DHD Series 52 and is the answer not in the manual?
General| Faders | Motorized |
|---|---|
| Aux Sends | 8 |
| Channels | 52 |
| EQ | 4-band parametric |
| Metering | LED |
| Routing | Flexible |
| Frequency Response | 20Hz - 20kHz |
Details the XS Core DSP unit, its processing capabilities, and additional features.
Introduces different I/O modules and their connections.
Describes the 52-1330 XS Multi-I/O Box and its interfaces.
Details the 52-7230 XC Mic/Headphone/GPIO module and its interfaces.
Describes the 52-7111 XC Digital I/O/GPIO module and its interfaces.
Details the 52-7222/52-7223 XC Analog I/O/GPIO module and its interfaces.
Explains how to exchange audio signals between two XS cores using DeviceLink.
Describes the control module interface, its TFT display, and control elements.
Details the 52/DX control module 52-1104, its components and functionality.
Shows the pin assignments for the 52-1330 module.
Details the D-Sub pin assignments for the 52-7111 module.
Provides D-Sub pin assignments for 52-7222 and 52-7223 modules.
Shows D-Sub pin assignments for the 52-7230 module.
Explains how to create a DHD exclusive network for configuration and usage.
Details connecting each USB audio port to a separate PC, supported OS.
Explains connecting both USB audio ports to a single PC, including OS requirements.
Describes the default ON setting for the internal sample rate converter.
Explains the menus and commands of the DXConfig software.
Details the File menu commands like New Device, Open Device, Save Device, History, and Exit.
Explains options within the View menu like Maintenance Window, Key Functions, Logic Sources, Audio Sources, and Watches.
Describes connecting the PC and device for transferring configuration data via Ethernet.
Covers options that affect DXConfig software operation, not device configuration.
Explains settings within the Toolbox Configuration window, including Project Files Save and File Menu options.
Details the Help menu, specifically the About section for software version information.
Details how to set which 52/DX modules are connected to the system via the Hardware page.
Explains configuring general options for the 52/DX, including Synchronization and TFT State Indicators.
Describes configuring inputs and outputs, including labels, stereo/mono, and mute settings.
Explains configuring keys, TFT views, and the OLED display on the central module.
Details configuring monitoring features and setting up talkback for each monitoring signal.
Explains configuring settings for all available buses in the 52/DX system.
Describes how to change sources for an output controlled by logic sources.
Explains creating users with different access rights and assigning them to preconfigured groups.
Details assigning access rights to authorisation groups for different functions.
To Next Page
