Version 1.2.0 - 04.02.2013
27
Configuration
Specifications and design are subject to change without notice. The content of this document is for information only. The information presented in this document does not form part
of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use.
Publication thereof does neither convey nor imply any license under patent rights or other industrial or intellectual property rights.
Window Logic Sources, selecting logic sources.
10.1.2.4 Audio Sources
This window shows all internal audio signals that are available for configuring the device. The audio signals are grouped
according to their characteristics.
Audio, selecting audio sources.
On the internal TDM bus, the following audio channels are available: inputs, delays, mixing functions (sums, groups, Aux
busses) pre-fader signals (fader channel after input processing), clean feeds (n-1 busses), monitor functions, fixed
To Next Page
Loading...
