© 2013 DHD Deubner Hoffmann Digital GmbH
24
Series 52 - 52/DX Compact Mixing Console Manual
Specifications and design are subject to change without notice. The content of this document is for information only. The information presented in this document does not form part
of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use.
Publication thereof does neither convey nor imply any license under patent rights or other industrial or intellectual property rights.
10.1 Program Menus
In this section of the manual, the menus and the commands of the DXConfig software are described.
10.1.1 File Menu
10.1.1.1 New Device
A new device is created. The device contains only the default values.
This command can also be executed by clicking in the toolbar.
If a device file is already open, it can be saved before creating the new file.
In DXConfig, only one device file can be shown at the same time. It is possible
to open the DXConfig software several times on a PC to be able to edit several
devices at the same time.
10.1.1.2 Open Device
An already existing device file is opened.
You can execute this command also by clicking in the toolbar or by pressing
Ctrl+O
.
If a device file is open already, it can be saved before opening the new file.
10.1.1.3 Save Device
The current device is saved.
The command can also be executed by clicking in the toolbar or by pressing
Ctrl+S
on the keyboard.
10.1.1.4 Save Device as
The current device file is saved with a different name. The program suggests the current name in the
Save
dialog box.
The new device file is available for further configuration directly after saving, the original file is closed.
You are automatically working with the new created file after saving.
To Next Page
Loading...
