DHD Series 52 - 10.2 Hardware

© 2013 DHD Deubner Hoffmann Digital GmbH
34
Series 52 - 52/DX Compact Mixing Console Manual
Specifications and design are subject to change without notice. The content of this document is for information only. The information presented in this document does not form part
of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use.
Publication thereof does neither convey nor imply any license under patent rights or other industrial or intellectual property rights.
10.2 Hardware
DXConfig Software - Hardware
On the
Hardware
page you can set, which 52/DX modules are connected to your system.
area
option
description
Common settings
Device name
Please enter a distinctive device name for this 52/DX mixing console.
SX Fader Modules
Select Type
Not available for 52/DX devices.
XS Core
Select Type
52-1804 is preselected and can not be changed.
use MADI Module
52-1821
If your XS core is equipped with a MADI module 52-1821, please
select this check box to enable the inputs and outputs for the
I/O
Settings
tab.
XS I/O connections
APC 4
Select an I/O type or set the value to
(none)
. Default is
52-1330
.
APC 3
Select an I/O type or set the value to
(none)
. Default is
(none)
.
APC 2
Select an I/O type or set the value to
(none)
. Default is
(none)
.
Console Preview
Shows a preview of the configured control module