Version 1.2.0 - 04.02.2013
23
Configuration
Specifications and design are subject to change without notice. The content of this document is for information only. The information presented in this document does not form part
of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use.
Publication thereof does neither convey nor imply any license under patent rights or other industrial or intellectual property rights.
10 Configuration
In general, the 52/DX is preconfigured with a default configuration and will work with default values.
To customise the configuration of your 52/DX mixing console, DXConfig software is required. You'll find this software on
the CD, delivered with your mixing console.
The DXConfig software is a Windows program that does not require any additional dynamic libraries (DLL files) or other
files. For installation, simply copy the program file to the hard drive. To load the software, double-click on the
DXConfig.
exe
. To remove the program, delete the
DXConfig.exe
.
When opening DXConfig, another software application is loaded automatically: DHD Communication Server (DHDCS).
DHDCS filters TCP/IP and UDP packets from the network that are transferred to and from DHD devices and prepares them
for several software applications. Please find detailed information on DHDCS in the Application Software Manual of the
RM4200D.
You can use DXConfig without any hardware connected, for example for changing or checking configurations offline.
Normally, the configuration PC is connected with the corresponding DHD system using the TCP/IP protocol via Ethernet.
To configure your 52/DX device double-click on the
DXConfig.exe.
After customizing the default values, you have to
load your configuration into the 52/DX device (see Transfer Menu). Now the new configuration is available in the device
and can be used.
In the following sections all configurable options are explained.
To Next Page
Loading...
