Version 1.2.0 - 04.02.2013
33
Configuration
Specifications and design are subject to change without notice. The content of this document is for information only. The information presented in this document does not form part
of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use.
Publication thereof does neither convey nor imply any license under patent rights or other industrial or intellectual property rights.
· Define here, how many backup generations shall be created. (min.
=0, max.=100)
· If this check box is selected, the software creates backups of the
project file automatically.
· The number of backup files can be set in the
Backup Levels
box. If the last file is written, the first is overwritten when saving
the next time. This way, it is lost!
· The desired interval between two backups can be entered in the
Auto Save each
(min.=0 minutes, max.=100 minutes) box.
· The created backup files have the number of the backup in their
extensions, for example
.sxc.1
. The higher this number is, the
newer is this file. If you want to use such a file in the DXConfig
software again, previously you have to change its extension to
.
dxc
again.
Show recently used files
list
· If this check box is selected, only the defined number of recently
opened projects is offered as a quick start option in the
File
menu.
· The desired number of entries can be defined in the
Show
recently used files list
box. (min.=0 entries, max.=100
entries)
View follows selected
object automatically
· By selecting this check box, the content of the navigator
automatically adapts to the options and functions that are currently
edited.
Hide sources without
label
· This option influences the
Audio sources
window. (See also
Audio Sources) If it is enabled, audio sources with deleted labels
on the
I/O Settings
tab, are deactivated in the
Audio
Sources
window.
Automatically select
next item
· Select this check box to work quicker when defining the Output
Routing on the
I/O Settings
tab. In this case, the DXConfig
software selects the following output automatically when assigning
audio signals to the outputs - in the output list as well as in the list
of audio signals in the
Audio Sources
window.
10.1.5 Help Menu
10.1.5.1 About
If you select
About
, the
Information
window opens.
Here, the date of creation of the software and the version of the used DXConfig are shown, for example
Version
7.1.4.0
Please always mention the complete version name when asking for servicing.
The version number of the DHDCS that is included in DXConfig is also shown in this window.
To Next Page
Loading...
