DHD Series 52 - 7.3 D-Sub Pin assignment of 52-7222; 52-7223; 7.4 D-Sub Pin assignment of 52-7230; 7.5 Network connection

© 2013 DHD Deubner Hoffmann Digital GmbH
18
Series 52 - 52/DX Compact Mixing Console Manual
Specifications and design are subject to change without notice. The content of this document is for information only. The information presented in this document does not form part
of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use.
Publication thereof does neither convey nor imply any license under patent rights or other industrial or intellectual property rights.
7.3 D-Sub Pin assignment of 52-7222 / 52-7223
Rear View 52-7222 / 52-7223
The connectors on the rear site of the 52-7222 and 52-7223 are D-sub type (9 pins) and provide all GPIOs for this
module.
Weblink
Please find a PDF file with pin assignments in the 52/DX List of Modules on
www.dhd-audio.com.
7.4 D-Sub Pin assignment of 52-7230
Rear View 52-7230
The connectors on the rear site of the 52-7230 are D-sub type (9 pins) and provide all GPIOs and analog control inputs
(ACI) for this module.
Weblink
Please find a PDF file with pin assignments in the 52/DX List of Modules on
www.dhd-audio.com.
7.5 Network connection
To connect a PC for maintenance and configuration or the usage of DHD software together with a 52/SX console, please
create a DHD exclusive network.
The following drawing shows a possible 52/SX installation and it should explain the Ethernet wiring of this application.