Need help?Do you have a question about the Diablo DSP-10 and is the answer not in the manual?
General| Brand | Diablo |
|---|---|
| Model | DSP-10 |
| Category | Security Sensors |
| Language | English |
Covers sensitivity levels, frequency settings, response times, and vehicle hold parameters.
Details current draw, loop inductance, operating voltages, and output relay ratings.
Outlines operating temperature, storage, humidity, mounting, and housing details.
Explains detector reset, presence detection, and pulse detection modes.
Details fail-safe operation, sensitivity levels, and loop frequency selection.
Describes functions of DIP switches for Fail Memory, Presence, Output B, Boost, Extension, and Delay.
Explains the meaning of Power and Detect LED states and indicators.
Provides rules and best practices for installing inductive loops for optimal performance.
Guides on selecting a location and physically mounting the DSP-10 detector unit.
Covers wire types, gauges, loop configuration, and recommended turns for loops.
Details the wiring pin-out for the DSP-10 and loop connection requirements.
Explains the internal jumpers for setting fail-safe or fail-secure operation.
Diagnoses problems based on Power LED flash patterns and states.
Helps troubleshoot issues indicated by the Detect LED, including intermittent or absent signals.
To Next Page
