DSP-10 User Manual Page 4 of 26 DSP10_MAN_C
2. Introduction
The DSP-10 Detector is intended to be a top of the line single channel detector. Many features have been
included which are normally found only on more expensive models. The small package is powered by a high-
performance 16-bit microcontroller that does not skimp on performance. The DSP-10 Detector was designed to
retrofit into existing locations that may require a detector upgrade. This allows maintenance personnel to carry
only one detector to meet most, if not all, of their vehicle detection needs.
The detector uses an 11-pin relay socket for connections.
Figure 1: Product Views
To Next Page
Loading...
