Error! Use the Home tab to apply 標題 1 to the text that you want to appear here.
1
1. Introduction
The USB3.0 Gigabit Ethernet adapter, is a high performance and simple
plug-and-play Gigabit Ethernet network connection capability for desktops,
notebook PC’s, Ultrabook’s, docking stations, game consoles, digital-home
appliances, and any embedded system using a standard USB port.
The USB3.0 Gigabit Ethernet adapter offers a wide array of features including
IPv4/IPv6 checksum offload engine, crossover detection and auto-correction, TCP
large send offload and IEEE802.3az EEE (Energy Efficient Ethernet) that allows to
enter a low power idle state to reduce power and to achieve a more energy efficient
Ethernet. It supports dynamic cable length detection and dynamic power
adjustment Green Ethernet in Gigabit mode.
Features
Compliant with USB3.0 , USB 2.0 specifications
Supports all USB 3.0 power saving modes (U0, U1, U2, and U3)
Supports IEEE 802.3az (Energy Efficient Ethernet)
IEEE 802.3, 802.3u and 802.3ab compatible
Supports dynamic cable length detection and dynamic power adjustment
Green Ethernet (Gigabit mode only)
Supports IPv4/IPv6 packet Checksum Offload Engine (COE) to reduce CPU
loading, including IPv4 IP/TCP/UDP/ICMP/IGMP & IPv6 TCP/UDP/ICMPv6
checksum check & generation
Supports full duplex operation with IEEE 802.3x flow control and half duplex
operation with back-pressure flow control
Supports Jumbo frame
To Next Page
Loading...
Need help?
General
