link below. Note the Mac installation files are located in the Mac folder. For
windows 10 installation skip to page 11.
http://www.dmmdownload.com/downloads/CURRENT/PVR/vc500mac_win1
0.zip
Note: if you get the following message:
Go to “System Preferences”, “Security & Privacy” and under “General” Click
on “Open Anyway” and follow the software installation process
Enter your Empia S/N which is located on the paper CD sleeve
When complete you will see the message below. Just unplug and re plug the
VC500mac into your USB port
To Next Page
Loading...
