Diamond 600 - Reasonably Foreseeable Misuse; Operation;Use; Total Shutdown

A010046R290 Rev.1
Page 19 of 56
1.6 Reasonably foreseeable misuse
Any use other than what is specied in this manual is considered improper. When using the machine,
work or activities that may pose risks to the safety of the workers or cause damage to the appliance are
not permitted. Improper use includes:
• Placing the appliance in a weather-exposed outdoor area.
• Incorrectly installing the machine.
• Changing or tampering with the safety devices.
• Making changes or tampering with the appliance’s electronic elements.
• Not complying with the deadlines for periodic checks, maintenance and cleaning.
• Placing or storing ammable or explosive materials in the immediate vicinity of the machine.
1.7 Operation/use
• Before using the appliance for the rst time, clean the inside with warm water and mild soap. Avoid
using abrasive detergents or scouring powders. Lastly, rinse and dry the appliance thoroughly. The
manufacturer declines all responsibility if the products are not used as intended.
• The machines have not been designed for use in unsupervised environments. Furthermore, the
appliances are not suitable for outdoor installations and/or environments subjected to the weather
(rain, direct sunlight, etc.).
• Avoid placing hot food or evaporating liquids inside the appliance, as its function is to preserve the
product’s temperature, and not to lower it; the product should therefore only be inserted if it has
already cooled down.
• Cover or wrap foods to be preserved.
• Only keep the doors/drawers open for as long as it takes to insert or remove the food.
• The maximum load for each shelf / drawer is indicated in Tab. 1, p. 54.
• Do not store explosive substances such as pressurised containers or items containing a ammable
propellent.
Should any anomalies occur (short circuits, mechanical failures, electric cable deterioration, a
smell of gas indicating a possible leak, etc.), the person in charge of normally using the machine
must immediately switch o󰀨 the appliance, unplug it from the power mains and secure the work
area.
1.8 Total shutdown
When the unit is to be decommissioned for a lengthy period, the following measures must be taken:
• Turn o󰀨 the main switch.
• Disconnect the upstream power supply.
• Remove all the food from the refrigerated counters and clean the inside as well as all the accessories.
• Leave the refrigerated counters doors ajar so that fresh air can enter and prevent undesirable
smells from forming.
• Protect the stainless steel surfaces with a thin layer of Vaseline oil. To do this, soak a cloth in the oil
and rub vigorously.
• Periodically air out the premises.