Press ENTER KEY, select CAL TARGET mode (The display window in the middle shows ENTER
CALORIES TARGET) (image8)
1.You can enter value directly instead of pressing UP/DOWN button.
2.
Or press UP/DOWN
to set the value, ranging from 0.0~999.0 (the value
0.1
increase/decrease
with each press)
The console’s default mode is counting downward. And when the value returns to zero,
after four beepi
ng sounds, the console start counting upward.
image 8
PRESS ENTER
TIME TARGET SELECT
PRESS ENTER
DISTANCE TARGET SELECT
PRESS ENTER
CALORIES TARGET SELECT
PRESS ENTER
D.CALORIES
To Next Page
Loading...
