dibea R701 - Page 3

Product FeaturesProduct FeaturesProduct FeaturesProduct FeaturesProduct Features
Intelligent Suction AdjustmentIntelligent Suction AdjustmentIntelligent Suction AdjustmentIntelligent Suction Adjustment
This product is able to automatically adjust its suction power when meeting different floor
environments.Not only could it make cleaning more efficiently, but also it helps save more
than 30%
Considerate DesignsConsiderate DesignsConsiderate DesignsConsiderate Designs
Easy to operate.By pressing the
" " button, you could
easily direct the robot.
Washable DustbinWashable Dustbin
The dustbin and filter could be washed .
The dustbin and filter could be washed by
water easily without costing too much time
Besides,it could avoid dust blowing in the
air to cause a second polluting by washing
the dust bin under water.
Product FeaturesProduct FeaturesProduct FeaturesProduct FeaturesProduct FeaturesProduct FeaturesProduct FeaturesProduct Features
Intelligent Suction AdjustmentIntelligent Suction AdjustmentIntelligent Suction Adjustment
Considerate DesignsConsiderate DesignsConsiderate Designs
Washable DustbinWashable DustbinWashable DustbinWashable Dustbin
Various Cleaning ModesVarious Cleaning ModesVarious Cleaning ModesVarious Cleaning ModesVarious Cleaning ModesVarious Cleaning ModesVarious Cleaning Modes
Four cleaning modes are provided to meet your needs
Auto cleaning modeAuto cleaning modeAuto cleaning modeAuto cleaning mode
The robot will clean a room automatically and adjust
its cleaning according to the situation.
NoteNoteNoteNoteNote
To start the auto mode, only press
Note
button on the machine or
with the remote control.
Product FeaturesProduct FeaturesProduct FeaturesProduct FeaturesProduct FeaturesProduct Features
2
Spot cleaning modeSpot cleaning modeSpot cleaning modeSpot cleaning modeSpot cleaning mode
The robot will spiral intensely when it detects a
dirtier area.You could use the remote control
to start the spot cleaning.Once if finishes
cleaning the dirty area,the robot will change to
the auto cleaning mode automatically.
3
Edge cleaning mode
When the robot detects obstacles(wall for example).
Edge cleaning modeEdge cleaning modeEdge cleaning modeEdge cleaning mode
It will change to the edge cleaning mode automatically.
And it will start cleaning along the abstacles with its
two side brushes.
33
33
4
Scheduling modeScheduling modeScheduling modeScheduling modeScheduling mode
When certain time is scheduled,the robot will leave
the home base and start working in the scheduled
time.