dibea D500 Pro - User Manual

Need help?

Do you have a question about the dibea D500 Pro and is the answer not in the manual?

Summary

Safety Instructions

General Safety Precautions

Basic safety precautions and warnings for operating the appliance to reduce risks.

Product Maintenance

Dust Bin and Filter Cleaning

Instructions for cleaning the dust bin and HEPA filter screen.

Side Brush Maintenance

Guidance on installing, removing, and cleaning the side brushes.

Sensor Cleaning

Steps to wipe and clean the cliff sensors, collision rod light filter, and rear window.

Wheel Cleaning

Procedure for cleaning the universal wheel and bull wheel.

Charging Pole Piece Cleaning

How to clean the charging contact pieces on the host and charging base.

Suction Port Cleaning

Instructions for cleaning the suction port on the robot vacuum.

Product Components

Host and Accessories List

List of all included components and accessories with quantities.

Host Diagram

Labeled illustration of the robot vacuum host's external and internal parts.

Charging Base Diagram

Labeled illustration of the charging base and its components.

Dust Bin Components

Diagram showing the dust bin, handle, door, HEPA, and filter screen.

Water Tank Components

Illustration of the water tank, plug, button, and mop cloth.

Remote Controller Overview

Explanation of the remote controller's buttons and their functions.

Product Operation

Pre-operation Precautions

Important checks and preparations before starting the robot vacuum's cleaning cycle.

Battery Charging

Instructions for connecting the charging base and charging the robot vacuum.

Extending Battery Life

Tips for maximizing the lifespan of the robot vacuum's battery.

Battery Replacement

Step-by-step guide for removing and replacing the internal battery.

Quick Operation Guide

Basic steps to start and manage the robot vacuum's cleaning cycles.

Host Key Functions

Explanation of the functions of the host's START key in different states.

Host Key Status Indicator

Description of the LED indicator lights on the host and their corresponding working states.

Water Tank Usage

Instructions for using the water tank for mopping, including placement and water filling.

Water Tank Installation

Procedure for attaching the water tank to the robot vacuum.

Water Tank Removal

Steps to detach the water tank from the robot vacuum.

Reservation Setting

How to set up scheduled cleaning times using the remote control.

Time Setting

Guide to setting the current time on the remote control.

Scheduled Cleaning Setup

Steps to set a fixed-time reservation for automatic cleaning.

Cancel Reservation

Instructions for canceling a previously set cleaning reservation.

Malfunction Routine

Troubleshooting Common Errors

Lists common errors, their possible causes, and solutions for the robot vacuum.

Product Specifications

Technical Specifications Overview

Detailed specifications including dimensions, weight, battery, and capacities.

This document describes the Dibea D500 Pro Robot Vacuum Cleaner, a D-shape exclusive design product from Suzhou Dibea Electrical Technology Co., Ltd. This robot vacuum is designed for automated floor cleaning, offering both dry vacuuming and wet mopping functionalities.

Function Description:

The Dibea D500 Pro is a robotic vacuum cleaner capable of autonomous cleaning. It features a D-shape design, allowing it to clean corners and edges more effectively. The device can be operated via a host key or a remote control with a screen. It supports various cleaning modes including automatic cleaning, focus cleaning, and scheduled cleaning. The robot is equipped with sensors to navigate and avoid obstacles, drops, and collisions. It can automatically return to its charging base when the battery is low or after completing a cleaning cycle. The D500 Pro also includes a water tank for wet mopping, which can be installed and removed as needed. Voice prompts are available to provide status updates to the user.

Important Technical Specifications:

Dimensions:
- Diameter: 295mm
- Height: 75mm
Weight:
- Net weight: 2.2kg
Electrical:
- Voltage: 14.8V
- Battery: Li-ion 2200mAh
Capacities:
- Capacity of dust bin: 400ml
- Capacity of the water tank: 75ml
Charging:
- Charging type: Automatic charging / manual charging
- Charging time: About 4-5 hours
Working Time: About 90-110 minutes

Usage Features:

Operation Modes: The robot can be started, stopped, and put into standby or dormant states using the host's START key or the remote control.
Remote Control: A remote control with a screen allows for viewing/setting time, setting cleaning reservations, controlling movement (forward, back, left, right), entering recharging mode, adjusting suction settings (mute, routine, powerful), and initiating focus cleaning.
Scheduled Cleaning: Users can set a daily cleaning reservation time via the remote control, after which the robot will automatically clean at the scheduled time.
Water Tank Functionality: The product includes a water tank for mopping. Users are instructed to paste the mop cloth onto the tank, add water, and then install the tank onto the machine. It is important to remove the water tank when charging, when the machine is not in use, or when moving the machine. The water tank should not be used on carpets.
Battery Management: The manual provides instructions for extending battery life, including fully charging the machine for 5 hours before first use, charging as soon as power is insufficient, and fully charging and turning off the power switch if not used for a long time (over 3 months).
Safety Precautions: The manual emphasizes several safety guidelines, such as only allowing authorized technicians to disassemble the product, using original battery and power adaptor, avoiding wet hands when handling power components, removing fragile items and tangling objects from the floor before cleaning, and not using the product in wet environments or on long plush rugs/dark colored floors. It also warns against using the product without special guidance for children or mentally challenged individuals, or in open areas without protective guards.

Maintenance Features:

Dust Bin and Filter Screen Cleaning: The dust bin should be cleaned once a week, and the HEPA filter screen should be washed every 15-30 days. It's crucial to ensure the filter screen and HEPA are dry before reinstallation and not to expose them to the sun. The HEPA is a replaceable accessory.
Side Brush Cleaning: Instructions are provided for installing, disassembling, and cleaning the side brushes. Users should check for damage or foreign matter and clean with a tool or duster cloth. If crimping or deformation occurs, soaking in warm water for 5 seconds is recommended. Damaged brushes should be replaced.
Sensor Cleaning: The cliff sensor, collision rod light filter, and rear window should be wiped with a cleaning tool or soft cloth.
Wheel Cleaning: The universal wheel and bull wheels should be cleaned regularly by pulling them out and wiping them.
Charging Pole Piece Cleaning: The charging contact pieces on both the host and the charging base should be cleaned.
Suction Port Cleaning: The suction port should be cleaned to remove any foreign matter or hair.
Troubleshooting: A "Malfunction Routine" section provides common errors, possible causes, and solutions, such as turning on the power switch if the machine doesn't start, installing the dust bin if it's not detected, cleaning the dust bin or suction port if the fan fails, or shaking the collision rod if it's clamped.