TroubleshootingTroubleshootingTroubleshooting
The machine
doesn't work
Power connection error
The power button hasen't been
turned on
Check the power cord and
power plug is intact
Press power button
The suction
becomes weak
The dust tank is blocked by dust
The filter is blocked by dust.
The air outlet is blocked.
Clean the dust bin.
Clean the filter.
Clean the air outlet.
The UV light
doesn't work
The cleaned objects do not have
strong reflection or the distance is
too long.
The machine is placed vertically
The two transparent films on the
bottom of the machine are covered
by dust.
Angle is greater than 30°
Usually, the machine will turn on
the UV light automatically when
approaching the objects(5cm)
Clean them with half-wet
cotton cloth.
cause
solution
To Next Page
Loading...
