Need help?Do you have a question about the DIEL MT 200 and is the answer not in the manual?
General| Supply voltage | 24 VDC |
|---|---|
| Power consumption | 5 W |
| Operating temperature | -10°C to +55°C |
| Number of inputs | 8 |
| Number of outputs | 8 |
| Input Voltage | 24 VDC |
| Output Voltage | 24 VDC |
| Protection Class | IP20 |
Details about the device's physical and electrical specifications.
Specifies the physical dimensions and weight of the device.
Details the voltage, frequency, and absorption for power supply.
Describes analogical inputs and relay outputs of the device.
Lists features like box material, protection degrees, display, and alerts.
Covers storage, isolation, software config, resolution, working temp, humidity, connectors.
Provides guidance on how to install the device into a panel.
Explains how to perform connections on the terminal board.
Details the process of configuring device parameters via the interface.
Details programming modes (0-4) for fan control and advanced settings.
Guides on how to set pre-alarm and alarm temperatures.
Explains how to set low (L) and high (H) fan thresholds.
Describes automatic/manual display modes and parameter visualization.
Details independent threshold programming for each channel.
Explains how to perform a test on the device's relays.
Describes how probe errors (disconnect, short circuit) are indicated.
Explains how the device reacts to temperature changes and triggers relays/LEDs.
Outlines the warranty period, conditions, and exclusions.
Warns against specific electrical tests and direct transformer connections.
To Next Page
