What to do if Dietz Medical Equipment seat does not move?
If the seat of your Dietz Medical Equipment isn't moving, there are a few potential causes. First, the battery might be flat, in which case you should charge it. Alternatively, there could be a fault in the drive, requiring repair by a specialist. Finally, the hand control cable could be faulty, and you may need to replace the hand control.
Why Dietz Medical Equipment battery will not charge?
If the battery of your Dietz Medical Equipment isn't charging, it could be due to a faulty battery, which should be checked or replaced by a specialist. Another possibility is a faulty power supply unit.
Why red LED is on in my Dietz Medical Equipment hand control?
If the red LED in the hand control of your Dietz Medical Equipment is lit, it indicates that the battery is flat. You should charge the battery.
How to fix flashing red LED on Dietz Medical Equipment hand control?
If the red LED in the hand control of your Dietz Medical Equipment flashes for 5 seconds, it means the hand control is not correctly plugged into the drive. To fix this, push the jack socket completely onto the jack plug.
Basic information about the manual's purpose and structure.
Defines the intended use and limitations of the bath tub lifter.
Instructions for disposing of the appliance and its battery.
Information regarding product compliance with medical directives.
Guidelines for reusing or reconditioning the bath lifter.
Information on the expected lifespan and factors affecting it.
Explains the different warning categories used in the manual.
Provides crucial safety precautions for operating the bath lifter.
Safety advice regarding electromagnetic fields and device operation.
Instructions for charging the hand control's battery.
Step-by-step guide for attaching the suction feet to the base plate.
Details on using the hand control for operating the bath lifter.
Instructions on how to raise the seat unit using the hand control.
Instructions on how to lower the seat unit using the hand control.
Procedure for activating the emergency stop function.
Cleaning and care instructions for the seat unit and backrest.
Cleaning and care instructions for the hand control and charger.
Guidelines for regular maintenance and visual inspection.
Instructions for fitting the sideflap diverter to bath tub handles.
Steps for fitting the height adapters to the base plate.
General| Brand | Dietz |
|---|---|
| Model | KANJO |
| Category | Medical Equipment |
| Language | English |
To Next Page
