Dietz KANJO - Table of Contents

4/14 REVISED 2017-02-10 – 3.3
Contents
1 General instructions ....................... 5
1.1 Introduction .............................................. 5
1.2 Proper use ............................................... 5
1.3 Disposal ................................................... 5
1.4 CE mark ................................................... 5
1.5 Reuse / conditioning ................................ 5
1.6 Service life ............................................... 5
2 Safety instructions ......................... 6
2.1 Warning notices and symbols ................. 6
2.2 General safety information ...................... 6
2.3 Safety information relating to
electromagnetic compatibility .................. 6
3 Description ...................................... 6
3.1 Scope of delivery ..................................... 7
3.2 Accessories ............................................. 7
3.3 Rating plate ............................................. 7
3.4 Technical data ......................................... 7
4 Transport and storage .................... 8
5 Putting the bath tub lifter
into operation ................................. 8
5.1 Charging the hand control battery ........... 8
5.2 Fitting the suction feet ............................. 8
5.3 Assembling the seat unit in the
bath tub .................................................... 9
5.4 Fitting the backrest .................................. 9
5.5 Check before use .................................... 9
6 Operating the bath tub lifter ......... 10
6.1 Hand control .......................................... 10
6.2 Raising the seat ..................................... 10
6.3 Lowering the seat .................................. 10
6.4 EMERGENCY STOP function ............... 10
7 Bathing .......................................... 10
8 Disassembling the bath
tub lifter ......................................... 11
9 Troubleshooting ........................... 11
10 Maintenance and care .................. 12
10.1 Seat unit and backrest ........................... 12
10.2 Hand control and charger ...................... 12
10.3 Maintenance and inspection .................. 12
11 Fitting accessories ....................... 12
11.1 Fitting the sideflap diverter .................... 12
11.2 Fitting the height adapters ..................... 12
11.3 Fitting the abductor wedge .................... 13