15
5 mainTenance
PLANETARY GEAR OIL
The Trencher Planetary Unit is a sealed Unit. If there is any sign of oil leaks please contact your nearest DIGGA dealer before carrying out
any repairs, as there can be other causes for seal leaks.
The Planetary Drive Unit in the Trencher uses the Gear Oil (Valvoline EPG320) for lubrication of gears and bearings. The unit holds 600ml
of gear oil. The gear Oil should be drained and replaced after the rst eight (8) months of use from purchase. Thereafter every twelve
(12) months or 1000 hours – which ever comes rst. Contact your nearest DIGGA Dealer for Gear Oil change procedure.
● Continuous operating temperature must not exceed 80°c.
● During extended stationary periods (one month or more), the unit should be run monthly to immerse all internals in oil, thereby
preventing corrosion.
● Oil should be changed when hot, to prevent a build up of sludge deposits. Flush interior of unit with uid recommended by oil
companies.
● Check for leaks regularly and if an oil leak is detected contact your nearest DIGGA Dealer for remedy instructions.
● Use only the prescribed oil when relling. Valvoline EPG320 Gear Oil.
● DO NOT mix oil of different viscosity, NOT even those of the same brand.
● NEVER mix mineral and synthetic oils.
● Cleanliness is necessary when changing oil.
To Next Page
Loading...