Digga Mini Trencher - Safety Stickers

18
PM-000005 - Trencher Operators Manual - December 2012
6 safeTy - sTicKer locaTion
PLACEMENT OR REPLACEMENT OF SAFETY
SIGNS
1. Clean the area of application with non-ammable
solvent, then wash the same area with soap and
water.
2. Allow the surface to fully dry.
3. Remove the backing from the safety sign, exposing
the adhesive surface.
4. Apply the safety sign to the position shown in the
diagram above and smooth out any bubbles.
INSTRUCTIONS
● Keep all safety signs clean and legible.
● Replace all missing, illegible, or damaged
safety signs.
● Replacement parts for parts with safety signs
attached must also have safety signs attached.
● Safety signs are available from your dealer for
from Digga Australia.
ITEM 2
CAUTION
KEEP 6M/20FT CLEAR
OF ALL MOVING PARTS
ITEM 3
NO
STEP
♦ PLEASE READ OPERATORS MANUAL
BEFORE OPERATION
♦ ENTANGLEMENT WITH ROTATING
PARTS CAN CAUSE INJURY OR DEATH
♦ ENSURE ALL ONLOOKERS KEEP
6M/20FT CLEAR OF ALL MOVING PARTS
ITEM 4
ITEM NO ORDER CODE DESCRIPTION QTY
1 DE-000039 CAUTION - PLEASE READ 1
2 DE-000034 CAUTION - 6M/20FT CLEAR 1
3 DE-000054 DECAL - NO STEP 1
4 DE-000167 CAUTION - TRENCH STRAIGHT 1
5 DE-000168 DIGGA SERIAL TAG
1
2
3
4
5