Digga Mini Trencher - WHEN MOUNTING THIS PRODUCT TO YOUR SKID STEER LOADER; BEFORE EACH USE, THOROUGHLY INSPECT THIS PRODUCT; WHEN OPERATING THIS PRODUCT IN ACCORDANCE WITH DESIGN INTENTIONS; WHEN ADJUSTING, SERVICING OR REPAIRING THIS PRODUCT

24
PM-000005 - Trencher Operators Manual - December 2012
10 safeTy - WorKinG WiTh The aTTachmenT
WHEN MOUNTING THIS PRODUCT TO YOUR SKID STEER LOADER
● Refer to the operator’s manuals of your loader, and your quick-attach for special or detailed mounting instructions.
● This product should t onto the quick-attach Frame.
● If this product does not t properly, contact your Digga Dealer before operating.
● Never place your nger into the mounting plate or 3-point hitch or loader holes. A slight movement of the power unit or this
product could cause serious injury.
BEFORE EACH USE, THOROUGHLY INSPECT THIS PRODUCT
● Make certain that all safety signs are in place and legible. Refer to the safety sign section in this manual for the placement of
safety signs for this product.
● Replace all damaged or excessively worn parts and hardware only with genuine Digga parts or with properly rated fasteners,
hydraulic hoses, or ttings.
● Make certain that all locking pins, latches, and connection devices are properly installed and secured.
● Make certain that all protective guards, canopies, doors, etc., are in place and secure.
WHEN OPERATING THIS PRODUCT IN ACCORDANCE WITH DESIGN INTENTIONS
● Dial 1100 before you dig. Know your digging area! Avoid hitting under ground cables and pipes, overhead wires, and other hazards.
● Do not drive near the trench. Always back away from the trench before turning.
● Never use the Trencher on a machine that is not equipped with a cab or ROPS, and operator restraints (seat belts or
equivalent devices).
● Know your Machines safe operating weight limit, and the weight of loaded attachment.
● Never dig close to machines wheels or under the machine; this can cause a cave in and vehicle overturn.
● Use caution when working close to fences and ditches, or on uneven ground.
WHEN ADJUSTING, SERVICING OR REPAIRING THIS PRODUCT
● Make no modications to your Trencher.
● When making repairs, use only genuine Digga parts or, for fasteners, hydraulic hoses, or hydraulic ttings, use only properly
rated parts.
● Replacement parts, for parts with safety signs attached, must also have safety signs attached.