12
Please be noted that, even if the safety lock
handle is placed at locking position, the
bulldozing blade, boom, and auxiliary hydraulic
controls can’t be locked. Do not touch controls
accidentally.
While lifting up or lowering down the safety
lock handle, take caution not to touch any
joystick.
Before leaving the driver seat, lower the
working device onto the ground, lift up the safety lock handle to locking position, and stop the
engine. Meanwhile, ensure to withdraw the key, close the doors and hoods, and carry the key
with you and then preserve it in a designated place.
Guard against Fire and Explosion Dangers
Keep fuel, lubricating oil, grease, and
antifreeze away from flame. The fuel is
especially flammable and dangerous. Handle
these flammables away from ignited
cigarettes, matches, lighters, and other flame
or ignition source.
Do not smoke or use open fire while handling
fuel or performing the operations of the fuel
system.
Do not leave the operation site while filling
fuel or lubricating oil.
Do not disassemble the fuel tank cap or refuel while the engine is running or is not cooled down.
In addition, do not splash fuel to any machine hot surface or electronic system part. Immediately
clean the overflown fuel or lubricating oil thoroughly.
Check for leakage of fuel and lubricating oil. Please eliminate the leaks and clean the machine
before operation.
Please move the flammables to a safe place before polishing or welding operations. Do not cut or
weld any pipeline or pipe that may contain flammable liquid. Please clean thoroughly by non-
flammable solvent before cutting or welding.
To Next Page
Loading...
Need help?
General