14
Guard against Crushing and Cuts
During operations, non-authorized personnel
are prohibited to access the working zone.
Please strictly abide by the rules and
environmental standards applicable for this
working zone.
Never place your hand, foot, or other body
parts between the superstructure and chassis
or tracks, between machine body and working
device, or between cylinder and motion parts. During movement of machine, these clearances
will change and may cause serious injuries or deaths.
Precaution during Preparations
Understanding of working zone
Before starting operations, understand the
situation of working zone to ensure safety.
Check the terrain and ground situation of working
zone. For indoor operations, check the building
structure and when necessary, take safety
measures.
Ensure to keep away from dangers and obstacles
such as water ditch, underground pipelines, trees,
cliffs, overhead cables, and roads with falling stone
or landslide danger.
Check the positions of underground gas pipelines, water
pipelines, and electric cables together with administrator. If
necessary, discuss with administrator to determine the detailed
safety measures to be taken to ensure safety.
During operations on road, ensure to take the safety of
pedestrians and vehicles into consideration. Use a signaler
and/or signals. Isolate the working zone against access to non-
authorized personnel.
To Next Page
Loading...
Need help?
General