8
Machine Description
Front, Rear, Left, and Right
The front, rear, left, and right of the machine
indicated in this manual are based on the
status sitting in the driver seat, with the
bulldozing blade visible in the front.
Designated Operations
This machine is mainly applied for following
operations:
• Digging
• Ditching
• Side ditching
• Leveling
• Loading
Product Features
• “Flexible machine width structure”
track width
• Low engine noise and emission
• Run-in First 100h (Based on reading of hour meter) for new machine
Operate as per the following instructions:
Using a new machine without running-in will deteriorate acceleration performance and probably
shorten the life of machine.
Sufficiently warm up the engine and hydraulic oil.
Avoid heavy-load and rapid operations.
Maintain the load at approximately 80% of maximum load capacity during operations.
Do not start, accelerate, steer, or stop suddenly, unless it’s really necessary.
Notes about Reading of This Manual
Please be noted that the descriptions and graphics contained in this manual are general
representations for your guidance.
To Next Page
Loading...