AnywhereUSB User Manual (90001085_F1) 65
8. In the event the host PC requests a Group that is not configured
on the AnywhereUSB unit, the host PC Connection Status will
display something similar to the following indicating that the
selected Group is not configured on the given AnywhereUSB unit
(see below).
In the above example, the Host List section on the right-side of the
Configuration Utility indicates that Groups 1 through 7 have been
configured on the AnywhereUSB unit. All of the Groups are
available for host PC connections except Group 4 (which is owned
by the host PC with IP address 192.168.1.17). When a host PC is
configured for a Group that is not configured on the given
AnywhereUSB unit, a Yellow Warning Symbol will be displayed
in front of the AnywhereUSB unit.
To Next Page
Loading...
Need help?
General
