AnywhereUSB User Manual (90001085_F1) 22
4 Initial AnywhereUSB Configuration
This chapter explains how to configure the IP address in a new
AnywhereUSB unit.
Initial Configuration
To begin the initial configuration:
1. Launch the AnywhereUSB Configuration Utility from the Start
menu. A new AnywhereUSB will attempt to obtain an IP address
from a DHCP Server. If one is not available, it will self-generate an
AutoIP address.
2. Right click the AnywhereUSB entry and click the Configure
button, or double click to configure the AnywhereUSB unit.
To Next Page
Loading...
