Digi AnywhereUSB/14 User Manual

AnywhereUSB User Manual (90001085_F1) 19
Cabling
To connect the AnywhereUSB to a Network:
1. Connect a standard Ethernet Network to the AnywhereUSB.
2. Connect the other end of the Ethernet cable to a 10-/100-BaseT
switch or hub.
3. Connect one end of the power supply into the back of the
AnywhereUSB and the other end into an AC outlet. (For the
AnywhereUSB/14 plug the power cord directly into the unit).

Digi AnywhereUSB/14 Specifications

General

Brand	Digi
Model	AnywhereUSB/14
Category	Network Router
Language	English