Digi ConnectPort LTS Series User Manual

Configure the device using the ConnectPort LTS web interface Peripheral
Digi ConnectPort LTS User Guide
96
n Enable SYSLOG service: The port data can be stored to the SYSLOG server in addition to the
port log storage location at the same time.
UDPSettings:
These UDP Settings are available only when the current port is configured with the Console
management, the UDP Sockets, or the Custom Profile.
n Send Socket ID: Include an optional identifier string with the data sent over the network.
The Socket ID can be 1 to 256 ASCII characters. Enter non-printable characters as
follows:
Character
Key
Sequence
backspace \b
formfeed \f
tab
\t
line feed
\n
return \r
backslash
\\
hexadecimal
values
\xhh
TCPSettings:
These TCP Settings are available only when you configure the current port with the Console
Management, Custom, or TCP Sockets profile.
n Send Socket ID: Include an optional identifier string with the data sent over the network.
The Socket ID can be 1 to 256 ASCII characters. Enter non-printable characters as
follows:
Character
Key
Sequence
backspace \b
formfeed \f
tab
\t
line feed
\n
return \r
backslash
\\
hexadecimal
values
\xhh

Digi ConnectPort LTS Series Specifications

General

Brand	Digi
Model	ConnectPort LTS Series
Category	Server
Language	English