Digi SM-5100 - SCALE IP ADDRESS

SM – 5100 Operation Manual
33
4.4 Main Group Files
Main Group is the middle category and can be assigned to a Department. The Main Group file is
used for categorizing the PLU's. Main Group Number of 1 ~ 999 are available for programming.
PLU's that are not linked to any Main Group Number will be assigned to the Main Group
Number 997 automatically. TAX is assigned to every Main Group. The assigned TAX will apply
for all the PLU's assigned to the Main Group. Up to 250 data can be programmed in Main
Group file. Maximum 16 characters per file are available and each with 1 line.
4.4.1 Program Main Group File
OPERATION
DISPLAY
REMARK
PT
kg
＄/kg
＄
[MODE][MODE]
[MODE]
S1
→
PLU
FILE
Enter S mode.
Lamp S turns on.
[3] or [︾]
S3
→
MGROUP
FILE
Select Main Group Programming.
[*]
S3.0
MG
0
NO SET
＄ /kg window indicates Main
Group code.
[1][1][1]
S3.0
MG
111
NO SET
Select Main Group No.
(Ex. [1][1][1])
[*]
S3.1
MG
97
(default)
DEPT NO
Enter Main Group programming,
Set the Department number.
[1]
[*]
S3.1
S3.2
MG
MG
1
DEPT NO
NAME 0
Link Main Group 111 to
Department 1.
[B][E][E][F]
[*]
S3.2
S3.3
MG
MG
BEEF
0
NAME 4
TAX NO
Name of the Main Group 111 is
“BEEF’.
Set the Tax number.
[1]
S3.3
MG
1
TAX NO
Tax of Main Group 111 is tax
number 1.
[PLU]
S3
→
MGROUP
FILE
Store the Main Group file, back to
S mode. If you want to exit
without saving data, press [◇] key
and then follow by [C] key